D-Link DXS-3600 Series Reference Manual page 635

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to specify the maximum number of STP packets that can be processed on that
interface in 1 second.
Switch# configure terminal
Switch(config)# interface ethernet 1
Switch(config-if)# l2protocol-tunnel shutdown-threshold stp 200
Switch(config-if)#
56-7 show l2protocol-tunnel
This command is used to display the protocols that are tunneled on an interface or on all interfaces.
show l2protocol-tunnel [interface INTERFACE-ID]
Parameters
interface INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the Layer 2 protocol tunnel related settings, status, and counters.
Example
This example shows how to display the protocols that are tunneled on all interfaces.
Switch# show l2protocol-tunnel
CoS for Encapsulated Packets
Drop Threshold for Encapsulated Packets :0
Protocol
-----------------
gvrp
stp
01-00-0c-cc-cc-cc
01-00-0c-cc-cc-cd
Port
---------- ------------ --------- --------- ---------- ---------- ----------
eth3/0/3
eth3/0/5
(Optional) Specifies the interface to display.
Drop Counter
------------
0
0
0
0
Protocol Shutdown
Threshold Threshold Counter
gvrp -
gvrp -
stp -
01000ccccccc -
:5
Drop Encap
2000 8
2000 8
2000 1268
2000 0
635
Decap Drop
Counter Counter
0 0
0 0
1100 0
0 0