D-Link DXS-3600 Series Reference Manual page 448

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch#
Display Parameters
VLAN
Forwarded
Dropped
DHCP Drops
ACL Drops
DHCP Permits
ACL Permits
Source MAC Failures
Dest MAC Failures
IP Validation Failures
Example
This example shows how to display the configuration and operating state of DAI.
Switch# show ip arp inspection
Source MAC Validation
Destination MAC Validation: Disabled
IP Address Validation
VLAN State
----- -------------
10 Enabled
VLAN ACL Logging DHCP Logging
----- ----------- ----------
10 Deny
Switch#
Display Parameters
VLAN
Configuration
ACL Match
Static ACL
ACL logging
The VLAN ID that is enabled for ARP inspection.
The number of ARP packets that are forwarded by ARP inspection.
The number of ARP packets that are dropped by ARP inspection.
The number of ARP packets that are dropped by DHCP snooping
binding database.
The number of ARP packets that are dropped by ARP ACL rule.
The number of ARP packets that are permitted by DHCP snooping
binding database.
The number of ARP packets that are permitted by ARP ACL rule.
The number of ARP packets that fail source MAC validation.
The number of ARP packets that fail destination MAC validation.
The number of ARP packets that fail the IP address validation.
: Disabled
: Disabled
ACL Match
------------------------------- ----------
-
Deny
The VLAN ID that enables ARP inspection.
The configuration state of ARP inspection.
Enable: ARP inspection is enabled.
Disable: ARP inspection is enabled.
The name of ARP ACL that is specified.
The configuration of the static ACL.
Yes: Static ARP ACL is configured.
No: Static ARP ACL is not configured.
The state of logging for packets dropped or permitted based on ACL
matches.
448
Static ACL
-