Show Cfm Ma - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Example
This example shows how to display the link-trace responses.
Switch# show cfm linktrace mepid 1 ma name op-ma domain op-domain trans-id 0
Transaction ID: 0
From MEPID 1 to 00-07-00-00-00-1C
Start Time: 2013-11-02 11:35:11
Hop: 1
MEPID: -
Ingress MAC Address: 00-00-00-00-00-00
Egress MAC Address: 00-09-5A-B9-AC-1B
Forwarded: Yes
Hop: 2
MEPID: 2
Ingress MAC Address: 00-07-00-00-00-1C
Egress MAC Address: 00-00-00-00-00-00
Forwarded: No
Switch#
Display Parameters
Relay Action
14-30

show cfm ma

This command is used to display the CFM maintenance association information.
show cfm ma name MA-NAME domain DOMAIN-NAME
Parameters
domain DOMAIN-NAME
name MA-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Relay Action: FDB
Relay Action: Hit
Hit: The LTM reached an MP whose MAC address matches the target
MAC address.
FDB: The Egress Port was determined by consulting the Filtering
Database.
MPDB: The Egress Port was determined by consulting the MIP CCM
Database.
Specifies the MD name as the identifier. It is a string type of maximum
length 22.
Specifies the MA name as the identifier.
284