DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display dynamically learned or manually configured multicast router interfaces.
Example
This example shows how to display IGMP snooping m-router information.
Switch# show ip igmp snooping mrouter
VLAN
Ports
-------- ----------------------------------
1
eth3/0/4 (static), eth3/0/3 (static)
eth3/0/6 (forbidden)
eth4/0/2 (dynamic)
2
eth4/0/4 (static)
eth4/0/3 (dynamic)
Total Entries: 2
Switch#
44-24
show ip igmp snooping statistics
This command is used to display IGMP snooping statistics information on the switch.
show ip igmp snooping statistics {interface [INTERFACE-ID] | vlan [VLAN-ID]}
Parameters
interface INTERFACE-ID
vlan VLAN-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
enabled.
Specifies the interface to display port statistics counters.
Specifies the VLAN ID to display VLAN statistics.
551