Multicast Vlan Commands - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide

65. Multicast VLAN Commands

65-1 mvlan enable
This command is used to enable multicast VLAN and configure some options for the multicast VLAN
feature. Use the no form of this command to disable the state or return to the default configuration.
mvlan {ipv4 enable | ipv6 enable}
no mvlan {ipv4 enable | ipv6 enable}
Parameters
ipv4 enable
ipv6 enable
Default
Multicast VLAN for the IPv4 packet process is disabled.
Multicast VLAN for the IPv6 packet process is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to enable multicast VLAN and configure some options for the multicast VLAN
feature.
Example
This example shows how to enable the multicast VLAN feature for IPv4 multicast packets.
Switch# configure terminal
Switch(config)# mvlan ipv4 enable
Switch(config)#
65-2 mvlan
This command is used to configure characteristics of the multicast VLAN feature. Use the no form of this
command to return to the default configuration.
mvlan {forward-unmatched | ignore-vlan}
no mvlan {forward-unmatched | ignore-vlan}
Parameters
Specifies to enable the IPv4 IGMP control packet process in multicast
VLAN.
Specifies to enable the IPv6 MLD control packet process in multicast
VLAN.
722