D-Link DXS-3600 Series Reference Manual page 528

Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Only one upstream can exist in an IGMP proxy device.
Example
This example shows how to configure interface VLAN 3 to act as the proxy upstream interface.
Switch# configure terminal
Switch(config)# interface vlan 3
Switch(config-if)# ip igmp proxy upstream
Switch(config-if)#
43-3 ip igmp proxy downstream
This command is used to configure an interface as a downstream in IGMP proxy. Use the no form of this
command to disable the IGMP proxy downstream function on the interface.
ip igmp proxy downstream
no ip igmp proxy downstream
Parameters
None.
Default
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Multiple downstream interfaces can be configured on an IGMP proxy device.
Example
This example shows how to configure interface VLAN 4 to act as the proxy downstream interface.
Switch# configure terminal
Switch(config)# interface vlan4
Switch(config-if)# ip igmp proxy downstream
Switch(config-if)#
43-4 ip igmp proxy designated-forwarding
528

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-3600-32s

Table of Contents