D-Link DXS-3600 Series Reference Manual page 468

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
36-11 show ethernet oam configuration
This command is used to display the configuration of the Ethernet OAM function.
show ethernet oam configuration [interface INTERFACE-ID [, | -]]
Parameters
interface INTERFACE-ID
,
-
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1.
Usage Guideline
The command is used to display port Ethernet OAM configurations.
Example
This example shows how to displays the Ethernet OAM configuration of interface eth1/0/1.
Switch# show ethernet oam configuration interface eth1/0/1
eth1/0/1
Ethernet oam state
Mode
Dying gasp
Critical event
Remote loopback OAMPDU : Processed
Error symbol period event
Notify state
Threshold
Window
Error frame event
Notify state
Threshold
Window
Error frame period event
Notify state
Threshold
Window
Specifies the interface ID to display. The allowed interfaces will only
include the physical port.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and after
the hyphen.
: Disabled
: Active
: Enabled
: Enabled
: Enabled
: 1 error symbol
: 10 deciseconds
: Enabled
: 1 error frame
: 10 deciseconds
: Enabled
: 1 error frame
: 100 (in 10000 frames)
468