Show Ip Dhcp Snooping Binding - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Usage Guideline
Use this command to display DHCP snooping configuration settings.
Example
This example shows how to display DHCP snooping configuration settings.
Switch# show ip dhcp snooping
DHCP Snooping is enabled
DHCP Snooping is enabled on VLANs:
10, 15-18
Verification of MAC address is disabled
Information option of allowed on un-trusted interface is disabled
Interface
------------ ---------- ------------
eth3/0/1
eth3/0/8
eth3/0/9
Switch#
22-15

show ip dhcp snooping binding

This command is used to display DHCP snooping binding entries.
show ip dhcp snooping binding [IP-ADDRESS] [MAC-ADDRESS] [vlan VLAN-ID] [interface
[INTERFACE-ID [, | -]]]
Parameters
IP-ADDRESS
MAC-ADDRESS
vlan VLAN-ID
interface INTERFACE-ID
,
-
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Trusted Rate Limit
no 10
no 50
yes no_limit
(Optional) Specifies to display the binding entry based on the IP
address.
(Optional) Specifies to display the binding entry based on the MAC
address.
(Optional) Specifies to display the binding entry based on the VLAN.
(Optional) Specifies to display the binding entry based on the port ID.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
370