D-Link DXS-3600 Series Reference Manual page 423

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
29-2 show dlms license
This command is used to display the installed DLMS license information on the switch.
show dlms license [unit UNIT-ID]
Parameters
unit UNIT-ID
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command will display the installed DLMS license information on the switch. The device's default
license and active license will be displayed for this command. If the optional keyword unit is not specified,
license information of current switch will be displayed.
Example
This example shows how to display the installed DLMS license information on the switch.
Switch# show dlms license
Device Default License : SI
Current Active License : EI
License Model
-----------------------------------------------------------------------------
DXS-3600-28SC-SE-LIC
DXS-3600-28SC-SE-LIC
DXS-3600-28SC-SE-LIC
------------------------------------------------------------------------------
DXS-3600-28SC-SR-LIC
------------------------------------------------------------------------------
* expired
Switch#
Display Parameters
Unit ID
Device Default License
(Optional) Specifies the unit ID of the switch in the switch stack.
Activation Code
xBc7vNWsSpchuQkGZsTfPwAcb
xBc7vNWsSpchuQkGZsTfPwAcc*
xBc7vNWsSpchuQkGZsTfPwAcd*
xBc8xTWsQpchxTkGZsTfPwBtt
The unit ID of the switch.
The default license mode. The default license will be active when no
license is active (For example, when no activation code is installed or
all installed activation codes have expired.) SI indicates 'Standard
423
Time Remaining
33 weeks
No Limited