Ip Http Shutdown - 3Com 5500-EI PWR Reference Manual

Parameters
minutes: Number of minutes. This argument ranges from 0 to 35,791.
seconds: Number of seconds. This argument ranges from 0 to 59.
Description
Use the idle-timeout command to set the timeout time. The connection to a user interface is terminated
if no operation is performed in the user interface within the timeout time.
Use the undo idle-timeout command to revert to the default timeout time.
You can use the idle-timeout 0 command to disable the timeout function.
The default timeout time is 10 minutes.
Examples
# Set the timeout time of AUX 0 to 1 minute.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] idle-timeout 1

ip http shutdown

Syntax
ip http shutdown
undo ip http shutdown
View
System view
Parameters
None
Description
Use the ip http shutdown command to shut down the WEB Server.
Use the undo ip http shutdown command to launch the WEB Server.
By default, the WEB Server is launched.
To improve security and prevent attacks to the unused Sockets, TCP 80 port for HTTP service will be
enabled or disabled after corresponding configurations.
TCP 80 port is enabled only after you use the undo ip http shutdown command to enable the
Web server.
If you use the ip http shutdown command to disabled the Web server, TCP 80 port is disabled.
1-14