Debugging - 3Com 8807 Command Reference Manual

System Debug
Commands

debugging

Parameter
None
Description
Use the display version command to view such information as software version,
issue date and the basic hardware configurations.
Example
# Display the information about the system version.
<SW8800> display version
Copyright Notice:
All rights reserved (Sep 15 2005).
Without the owner's prior written consent, no decompiling
nor reverse-engineering shall be allowed.
3Com-3Com Versatile Routing Platform Software
Copyright (c) 2004-2005 Hangzhou 3Com-3Com Technology Co.,Ltd. and
its licensors All rights reserved.
Copyright (c) 1998-2003 3Com Corporation Co.,Ltd. All rights reserved.
3Com Switch 8800 Family uptime is 0 week, 2 days, 1 hours, 17 minutes
SRPA 0: uptime is 0 weeks,2 days,1 hour,17 minutes
3ComSwitch 8800 Family with 1 MPC755 Processor
512M bytes SDRAM
16384K bytes Flash Memory
512K bytes NVRAM Memory
PCB Version :
BootROM Version :
CPLD Version :
Software Version :
3CV17538: uptime is 0 weeks,2 days,1 hour,15 minutes
3ComSwitch 8800 Family LPU with 1 MPC8245 Processor
128M bytes SDRAM
0K bytes NVRAM Memory
PCB Version :
BootROM Version :
CPLD Version :
Software Version :
CPUCard 1
PCB Ver :
CPLD Ver :
SubCard 1
PCB Ver :
CPLD Ver :
SubCard 2
PCB Ver :
CPLD Ver :
Syntax
debugging { all | timeout interval | module-name [ debugging-option ] }
undo debugging { all | module-name [ debugging-option ] }
Ver.F
111
001
Switch 8800 Family-Comware 310-r1265
REV.0
103
002
Switch 8800 Family-Comware 310-r1265
.4
001
Ver.B
NONE
REV.0
NONE
System Debug Commands 1033