System Guard Configuration Commands; Display System-Guard Ip State - 3Com Switch 4500 Family Manual

4

System Guard Configuration Commands

System Guard Configuration Commands

display system-guard ip state

Syntax
display system-guard ip state
View
Any view
Parameters
None
Description
Use the display system-guard ip state command to view the monitoring result and parameter settings
of System Guard against IP attacks.
Examples
# View the monitoring result and parameter settings of System Guard against IP attacks.
<Sysname> display system-guard ip state
System-guard IP is running!
IP-record threshold: 30
Deny threshold: 1
Isolated times of aging time: 3
Number of suspicious hosts that can be detected: 30
Number of suspicious hosts detected: 0
Table 4-1 Description on the fields of the display system-guard ip state command
System-guard IP is running
IP-record threshold
Deny threshold
Isolated times of aging time
Number of suspicious hosts that can be detected
Number of suspicious hosts detected
Field
System Guard against IP attacks is running
Threshold of the number of IP addresses that
can be learnt within 10 seconds
The maximum number of times an address can
be learnt for it to be blocked
Isolation time (the number of multiples of MAC
address aging time)
The maximum number of hosts to be monitored
The number of infected hosts detected
4-1
Description