Display Packet-Filter; Display Time-Range - 3Com 5500G-EI Command Reference Manual

284 C 8: U Q
HAPTER SING

display packet-filter

display time-range

S/ACL C
O OMMANDS
Example
Display the content of all the ACLs.
<SW5500>display acl all
Basic acl 2000, 0 rule,match-order is auto
Acl's step is 1
Advanced ACL
Acl's step is 1
rule 1 permit ip (0 times matched)
Syntax
display packet-filter { interface {
interface-num
View
Any View
Parameter
interface { i nterface-name
of the Switch, for more detail, please refer to the
unit-id
unitid
information of the specified unit will be displayed.
Description
Use the
display packet-filter
activated of ACL. The displayed content includes ACL number, subitem name and
activation status.
Example
To display the information of the activated ACL of all interfaces, enter the
following:
<SW5500>display packet-filter unitid 1
Syntax
display time-range { all |
View
Any View
Parameter
: Displays all the time-range
all
Specifies the name of the time range. This is a character string that starts
name :
with the letter (a-z or A-Z), ranging from 1 to 32 characters
Description
Use the
display time-range
the current time range. You will see the active or inactive state outputs
respectively.
3000, 1 rule
} | unitid unit-id
| interface-type interface-num
Unit ID. If user inputs this parameter, all the packet-filtering
:
command to view the information of the
name
}
command to view the configuration and status of
interface-name |
}
command in this manual.
port
interface-type
Interface
}: