Stp Tc-Protection; Stp Tc-Protection Threshold - 3Com S7906E Command Reference Manual

Examples
# Enable the root guard function for GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] stp root-protection

stp tc-protection

Syntax
stp tc-protection enable
stp tc-protection disable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the stp tc-protection enable command to enable the TC-BPDU attack guard function for the
device.
Use the stp tc-protection disable command to disable the TC-BPDU attack guard function for the
device.
By default, the TC-BPDU attack guard function is enabled.
Examples
# Enable the TC-BPDU attack guard function for the device.
<Sysname> system-view
[Sysname] stp tc-protection enable

stp tc-protection threshold

Syntax
stp tc-protection threshold number
undo stp tc-protection threshold
View
System view
Default Level
2: System level
1-32