Honda Accord 2008 Manual page 682

07/11/02 09:18:28 61TA0000_110_0363
Check all clamps, and make sure they are properly positioned and tightened.
All models except PZEV
＊０２
To FUEL RAIL
C
To EVAPORATIVE
EMISSION (EVAP)
CANISTER PURGE VALVE
A:
115 °
LEFT SIDE OF
THE VEHICLE
Make sure the clamp is
positioned as shown.
C:
120 °
Make sure the clamp is
positioned as shown.
To EVAP CANISTER
PURGE VALVE
FUEL TANK UNIT LOCKNUT
Replace.
LOCKNUT PLATE
Replace.
BASE GASKET
Replace.
B: When installing the fuel fill
neck tube, align the mark on
the tube with the projection
on the fuel fill neck fitting.
90 °
There should be Make sure the clamp is
no clearance. positioned as shown.
120 °
Make sure the clamp is
positioned as shown.
To PURGE PIPE
A
B
(cont'd)
11-363