Disable (Spanning Trees) - Juniper EX9200 Features Manual

disable (Spanning Trees)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
disable;
[edit protocols mstp interface interface-name,
[edit protocols mstp msti msti-id vlan (all vlan-id | vlan-name) interface interface-name],
[edit protocols rstp interface interface-name],
[edit protocols vstp vlan vlan-id interface interface-name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
Statement updated in Junos OS Release 15.1 for EX Series switches.
Disable MSTP, RSTP, or VSTP on a specific interface.
NOTE: You cannot disable spanning tree parameters for all interfaces.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring RSTP (CLI Procedure) on page 33
Configuring MSTP on page 108
Configuring MSTP on page 108
Configuring VLAN Spanning Tree Protocol on page 168
show spanning-tree bridge
show spanning-tree interface
Chapter 2: Configuration Statements for RSTP
37