Group (Uplink Failure Detection); Link-To-Disable - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

group (Uplink Failure Detection)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

link-to-disable

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
76
group group-name {
link-to-monitor interface-name;

link-to-disable

interface-name;
}
[edit protocols uplink-failure-detection]
Statement introduced in Junos OS Release 11.1 for EX Series switches.
Configure a group of uplink and downlink interfaces for uplink failure detection.
—Name of the uplink-failure-detection group.
group-name
The remaining statements are explained separately.
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Configuring Interfaces for Uplink Failure Detection (CLI Procedure) on page 35
link-to-disable interface-name;
[edit protocols uplink-failure-detection group group-name]
Statement introduced in Junos OS Release 11.1 for EX Series switches.
Configure the downlink interfaces to be disabled when the switch detects an uplink
failure. The switch can monitor a maximum of 48 downlink interfaces in a group.
—Name of the downlink interface or interface range in the group. The
interface-name
interface can be a physical interface or a logical interface.
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Configuring Interfaces for Uplink Failure Detection (CLI Procedure) on page 35
Copyright © 2016, Juniper Networks, Inc.