Disable Inline Flow Monitoring Services; Performing A Unified Issu - Juniper EX9200 Features Manual

Disable Inline Flow Monitoring Services

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
re1:
commit complete
re0:
commit complete
If you have configured inline flow monitoring using the
needs to be disabled before performing ISSU. Use the following procedure to disable
inline-jflow :
Perform this procedure on the master Routing Engine after enabling the
statement at the
synchronize
Deactivate sampling instances on all FPC slots by issuing the following command on
1.
each FPC and sampling instance:
user@host> deactivate chassis fpc slot-number sampling-instance instance-name
Disable forwarding options for all sampling instances with the following command:
2.
user@host> deactivate forwarding-options sampling instance instance-name
Deactivate flow monitoring using the following command:
3.
user@host> deactivate services flow-monitoring
Disable sampling on all interfaces with this command:
4.
user@host> deactivate interfaces interface-name unit unit-number family protocol sampling
(Optional) If sampling is done though a firewall filter statement, then disable the
5.
sampling statement with the following command:
user@host> deactivate firewall family family-name filter filter-name term term-name then
sample
NOTE: You can reactivate deactivated statements with the
configuration mode command.
Getting Started with Unified In-Service Software Upgrade on page 159
Understanding the Unified ISSU Process on the TX Matrix Router
Unified ISSU System Requirements on page 161
Best Practices for Performing a Unified ISSU on page 183
Example: Performing a Unified ISSU on page 188
Verifying a Unified ISSU on page 214
Troubleshooting Unified ISSU Problems on page 227
Deactivating and Reactivating Statements and Identifiers in a Junos OS Configuration
inline-jflow
inline-jflow
hierarchy level.
[edit system]
Chapter 17: Performing a Unified ISSU
command, then it
commit
activate
187