Removing And Installing Host Subsystem Components; Understanding The Effect Of Taking The Ptx5000 Host Subsystem Offline; Taking A Nonredundant Host Subsystem Offline; Taking A Backup Host Subsystem Offline - Juniper PTX5000 Hardware Manual

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

Removing and Installing Host Subsystem

Understanding the Effect of Taking the PTX5000 Host Subsystem Offline on page 383

Replacing a PTX5000 RE-DUO-C2600 Routing Engine on page 385

Replacing a PTX5000 RE-PTX-X8-64G Routing Engine on page 389

Replacing a CompactFlash Card in a PTX5000 Routing Engine on page 393

Replacing an SSD Drive on a RE-DUO-C2600-16G on page 396

Replacing an SSD Drive on a RE-PTX-X8-64G on page 399

Replacing a PTX5000 Control Board on page 401

Replacing a PTX5000 Management Console or Auxiliary Port Cable on page 406

Replacing a PTX5000 Management Ethernet Cable on page 407

Taking a Nonredundant Host Subsystem Offline on page 383

Taking a Backup Host Subsystem Offline on page 383

Taking a Master Host Subsystem Offline on page 383

Taking a nonredundant host subsystem offline shuts down the packet transport router.

Taking a backup host subsystem offline does not interrupt the functioning of the packet

transport router. The backup host subsystem is hot-removable and hot-insertable.

Removal or failure of the master Routing Engine affects forwarding and routing based

on the high availability configuration.

Chapters

Table of Contents