Call Duration Timer - Panasonic DBS 824 Manual

Call Duration Timer

Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FFl 2# 1# 32# (0,l or 2)#
Description
This timer determines how long the system waits before displaying call
duration timing on the phone's LCD For example, if the timer is
seconds, the call duration timer will appear 5 seconds after an outgoing
number is dialed, or 5 seconds after an incoming call is answered This timer
allows Caller ID information (if available) to appear before the call duration
timing is displayed
Programming r
Related Programming
Call Duration Display FFl 2# 1# l# (0 or l)#
SMDR Start Timer for CO Calls FFI 2# l# 2# (0,l or 2)#
Notes
of call duration The system begins
the SMDR Start Timer address (IT1 2# l# 2#) In order for call duration
be displayed, SMDR timing must start before call duration display begins (the
Call Duration Tier must be equal to or greater than the SMDR Start Timer)
the actual length of time that Caller ID information is displayed before the
LCD changes to call duration timing
Issued 3/l/95
This Call Duration Timer only affects the
the
actual
The setting for this Call Duration Timer will be
DBS 824-l O-400
Call Duration Timer
set to 5
or 2)#
seconds
timing
of the call according to
Page 1-37
to