System Setup.5 - Panasonic AUTO-LOGIC KX-F120 Operating Instructions Manual

System Setup
There are 19 user programable functions in the unit. After entering the Programming Mode by pushing the FUNCTION button,
these functions may be selected or changed by pushing the REDIAL or MUTE button.
No.
FUNCTION
LCD DISPLAY
PAGE
01 Date and Time
1/ 1/88 12:00AM See Example on page 6.
02 Logo and Sender's Identification
SENDER ID - See page 10 in INSTALLATION MANUAL.
03 Delayed Transmission (XMT)
DELAYED XMT-OFF Seepage 1-11.
04
Time of Delayed XMT
SEND AT 12:00AM
See page 1-11.
05 FAX No, of Delayed XMT
SEND TO
See page 1-12.
06 Remote ID for remote operation
REMOTE ID - 111 See page 2-2.
07
Caller's Recording Time
REC TIME - VOX See page 2-1.
08
CPC (Calling Party Control) Mode
See page 8 in INSTALLATION MANUAL.
09 Dial Speed for pulse dialing
See page 8 in INSTALLATION MANUAL.
10
Tone Detect
TONE DETECT-ON See page 8 in INSTALLATION MANUAL.
11 Journal
JOURNAL®AUTO
See page 1-16.
12 Transmission (TX) Report
TX REPORT - OFF
See page 1-15.
13 Transmission (TX) Speed
TX SPEED - 9600
See page 8 in INSTALLATION MANUAL.
14 ID Position
ID POSITION-OUT
See page 8 in INSTALLATION MANUAL.
15 Motor Test
MOTOR TEST See page 16 in INSTALLATION MANUAL.
16 Printer Test
PRINTER TEST
See page 16 in INSTALLATION MANUAL.
17
System Print
SYSTEM PRINT See page 1-17.
18 Telephone No. List Print
TEL LIST PRINT See page 1-17.
19 Journal Print
JOURNAL PRINT
See page 1-17.
System Setup
1 Push FUNCTION.
•The following message will be displayed.
SELECT COMMAND
2
Push REDIAL or MUTE until the desired message is
displayed.
• By using the REDIAL button, the function is
selected in the order of No. 01,02,03... 19.
•By using the MUTE button, the function is selected
in the order of No. 19,18,17...01.
3
Proceed to each section.
•Refer to page shown above.
5