F. Photosensitive Drum
Cleaner Assembly
1. Removing the Photosensitive Drum
Cleaner Unit
1) Open the front
remove the hopper unit stopper metal
fixing.
2) Open the hopper unit fully.
3) Remove the transfer drum knob, and
remove the two screws; then, detach the
transfer unit cover.
4) Loosen the screw [1], and rotate the blade
releasing lever [2] clockwise (unlocking
direction) until it stops. Then, tighten the
screw [1] to secure, and release the
photosensitive drum cleaner blade from
the photosensitive drum.
5) Remove the screw [3].
6) Slide out the photosensitive drum cleaner
unit [4] slightly; in this condition, turn the
unit counterclockwise, and slide it out.
COPYRIGHT © 2002 CANON INC.
cover
(left, right), and
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[1]
Figure 6-664
Figure 6-665
Figure 6-666
[2]
[3]
[4]
6-77