Duplexing Driver Pcb; Before Removing The Duplex Driver Pcb; Removing The Duplex Driver Pcb; Low-Voltage Power Supply Pcb - Canon imageRUNNERC1022 Service Manual

C1030 / Color imageRUNNER C1030iF
1) Remove the memory controller PCB [1].
- 4 connectors [2]
- 3 screws [3]
[1]
[3]

11.5.15 Duplexing Driver PCB

11.5.15.1 Before Removing the Duplex Driver PCB

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
3) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]

11.5.15.2 Removing the Duplex Driver PCB

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the duplex driver PCB [1].
- 3 connectors [2]
- 3 screws [3]
[3] [2] [1]

11.5.16 Low-voltage Power Supply PCB

11.5.16.1 Before Removing the Low-Voltage Power
Supply PCB
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
MEMO:
19 parts (e.g.: external cover, unit) need to be removed when removing the
low voltage power supply PCB. Be sure to have enough space equivalent to
1,700mm x 1,100mm for storing parts.
F-11-62
[2]
[3]
F-11-63
[2]
0019-5742
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 10-8)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-9)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]
0019-5743
7) Remove the Upper Frame Unit.(page 11-20)Reference [Removing the
Upper Frame Unit]
8) Remove the Reversal Unit.(page 9-29)Reference [Removing the Re-
versal Unit]

11.5.16.2 Removing the Low Voltage Power Supply PCB

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the switch button unit [1].
- 2 screws [2]
2) Disconnect the connector [1] and remove the 5 screws (TP) [2].
0019-5738
1100mm
[1]
[2]
F-11-64
Chapter 11
0019-5739
11-25