Electrical System; Dc Controller Pcb; Composite Power Supply Pcb - Canon GP215 Service Manual

VIII. ELECTRICAL
SYSTEM
A. DC Controller PCB
1. Removing the DC Controller PCB
1) Disconnect the power plug.
2) Remove the four screws, and remove the rear
cover.
3) Remove the two screws q, and disconnect all
connectors; then, remove the DC controller
PCB w.
Figure 4-801
COPYRIGHT © 1996 CANON INC.
1
2
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
B. Composite Power Supply
PCB
1. Removing the Composite Power
Supply PCB
1) Remove the DC controller PCB.
2) Remove the two screws, and remove the con-
nector mount q.
3) Remove the two screws e, and disconnect all
connectors; then, remove the composite
power supply PCB.
3
3
3
Figure 4-802
3
2
1
4–37