Removing The Front Deck; Removing The Horizontal; Registration Sensor - Canon GP605 Service Manual

13. Removing the Front Deck (lifter)
Draw-Out Sensor
1) Disconnect the connector [1] from the
bottom of the duplexing unit; then, re-
move the screw [2], and detach the front
deck (left) feed sensor [3].

14. Removing the Horizontal

Registration Sensor

1) Remove the duplexing unit from the
copier.
2) Remove the front cover.
3) Disconnect the connector [1], and remove
the three screws [2].
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP/FEEDING SYSTEM
Figure 7-F823
Figure 7-F824
[1]
[2]
[3]
[2]
[1] [2]
7-87