Copying Standard Original Sizes - Canon oce 31x5e Daily Maintenance

Copying standard original sizes

The Océ 31x5E processes 1- and 2-sided originals of different sizes and prints
them either 1-sided or 2-sided.
To make a full-size copy (1:1) of an 8.5 x 11"
original placed in the automatic feeder, you need only press the start button
. The required paper tray with the corresponding paper size for a 1:1 copy
will be automatically selected. If there is no paper tray with the same size, the
copier will automatically select another paper size and adjust the
reduction/enlargement factor. The automatically selected paper size and
applicable reduction/enlargement factor are shown above the 'Paper' and
'Basic' section titles.
If you need an enlarged or reduced copy, simply select the required paper size.
In doing so, you override the automatic paper selection. Because the reduction
or enlargement function is set to automatic by default, the correct
reduction/enlargement factor will be adopted accordingly. The paper sizes
available in each of the four paper trays are shown in the 'Paper' section.
[17] The 'Paper' section
If none of the paper trays contains the correct paper size, you can put the paper
for the job in paper tray 1 (see 'Loading paper' on page 76). This is the only
tray which can be adjusted for use with another paper size. You can also use
the special feeder (see 'Copying onto special material via the special feeder'
on page 64). The special feeder handles all paper sizes: standard DIN sizes,
folio and USA paper sizes. For a detailed list, refer to 'Copy materials that can
be used' on page 95. If necessary, trays 2 and 3 can be configured to hold USA
paper sizes.
38 Océ 31x5E Copy jobs & daily maintenance
, 8.5 x 11" or 11 x 17"