Motorola DSP56800 Manual page 355

MOVE(P)
Condition Codes Affected:
15 14
LF *
Note:
It is also possible to access the last 64 locations in the X data memory map using the MOVE(C) in-
struction, which can directly access these locations either using the address-register-indirect address-
ing modes or the absolute address addressing mode, which specifies a 16-bit absolute address.
Instruction Fields:
Operation
MOVE(P)
Timing: 2 + ea oscillator clock cycles
Memory:
1 + ea program words
Move Peripheral Data
MR
13 12 11 10 9
* * * * I1
L — Set if data limiting has occurred during move
Source Destination
X:pp HHHH
HHHH X:pp
Instruction Set Details
CCR
8 7 6 5 4 3
L
I0 SZ E U N
C W
2 1 Last 64 locations in data memory.
2 1
X:pp represents a 6-bit absolute I/O
address. Refer to I/O Short
Address (Direct Addressing):
<pp> on page 4-23.
MOVE(P)
2 1 0
Z V C
Comments
A-125