Figure 1.40 [Add Sb/Iob/Gspb To Partition] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Message number
I_00220
I_00427
I_00428
I_00429
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
The following sections describe the operations performed with the [Partition Configuration] window.
[Set Partition Name] button
Clicking the [Set Partition Name] button sets each partition name entered into cells in the [Partition Name] column
for partitions.
[Add SB/IOB/GSPB to Partition] window
Selecting the radio button of a partition in the [Partition Configuration] window and then clicking the [Add Unit]
button displays the [Add SB/IOB/GSPB to Partition] window. You can select the SB, IOB, or GSPB that is currently
in the Free status to incorporate it into the specified partition.

FIGURE 1.40 [Add SB/IOB/GSPB to Partition] window

Remarks
For 1800E2/1800E, a check is performed to prevent an SB with one mounted CPU from being incorporated into a
partition containing multiple SBs.
- In a partition configured with one SB, only one mounted CPU per SB is permitted.
- In a partition configured with more than one SB, two mounted CPUs are required for each SB.
Unable to set Home on Partition#%aa because this partition is under maintenance.
Select a partition.
The partition is not defined.
Only the alphanumeric character can be input to Partition Name area.
Message text
134 C122-E110-10EN