PRIMEQUEST 1000 Series Tool Reference
CHAPTER 4 PSA CLI (Command Line Interface) Operations
# /opt/FJSVpsa/bin/diskctrl -c ioc0/3
- In Windows
The following example shows all the SGPIO controllers in the operating system and a list of their slot statuses.
diskctrl -l
TABLE 4.3 SGPIO controller and slot status (Windows)
\\device\scsiport0
0 Disk0 Fault LED-Off
1 Disk1 Fault LED-Identify
2 none
3 --mount Fault LED-On
Remarks
The numbers shown under \\device\scsiportx are slot numbers.
- To confirm the mounting location of an HDD
diskctrl -i 1
- To turn off the blinking Fault LED indicating the location
diskctrl -o 1
(4) Output messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
In Linux
FJSVpsa : W 02152 diskctrl no memory available
FJSVpsa : W 02158 diskctrl Cannot blinking location-LED
FJSVpsa : W 02159 diskctrl Cannot clear location-LED
FJSVpsa : W 02165 diskctrl Operation not permitted
FJSVpsa : W 02167 diskctrl Invalid option
In Windows
Display example
Description of status
<= Operating normally
<= Displaying location
<= Empty slot
<= Rotation stopped
347
C122-E110-10EN