PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
FIGURE 5.29 Operation screen for the PXE boot Enable setting (3)
5. To save the changes and exit this menu, select [Commit Changes and Exit] and press the [Enter] key.
6. To exit this menu without saving the changes, select [Discard Changes and Exit] and press the [Enter] key.
7. When UEFI (PXE/iSCSI) is selected, to confirm your setting of [Enable], start the [Boot Manager] menu
after a reset.
You can confirm the added boot option in the manner shown in the display example in
of display of the [Boot Manager]
menu.
410
FIGURE 5.30 Example
C122-E110-10EN