Show Update_Status - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
#
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Are you sure to continue Firmware Update? [Y|N]:
The specified parameter is invalid
Unable to execute this command on a standby MMB.
Failed to get the firmware version.
The checksum of the firmware file is invalid.
The size of the firmware file is invalid.
The CRC of the firmware file is invalid.
Specified file is NOT a Firmware file.
Specified host does NOT respond.
Unable to execute the update under maintenance.
Current firmware is newer version.
Unable to execute the online update.
Please try the update after the system power off.
Unable to execute the update. TPM is effective.
Unable to execute the update. Standby MMB is fault or disable.
Unable to execute Firmware Update due to resource lock.
Please retry after waiting a while.
The firmware is being updated now.
(5) Processing
- Without the force option specified:
The general firmware version to be applied is compared with that in use. If the version to be applied is the
same or older than that in use, the command does not update the firmware.
Also, the versions of the individual firmware instances are checked. If the version to be applied is the same
as that of a firmware instance, the command does not update the firmware instance. In other words, the
command updates the firmware instance only if the versions are different.
- With the force option specified:
The general firmware version to be applied is not compared with that in use. The command forcibly updates
the current firmware with the applicable firmware version.
2.4.2

show update_status

The show update_status command displays the version of the firmware being batch-updated as well as the update
progress.
278 C122-E110-10EN