Figure 1.33 [Power Control] Window (Grayed Out); Table 1.56 Setting And Display Items In The [Power Control] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations

FIGURE 1.33 [Power Control] window (grayed out)

1. Select a process for the partition from the [Power Control] pull-down menu. Then, click the [Apply] button.
A confirmation dialog box appears.
2. Click the [OK] button to execute processing.
Click the [Cancel] button to cancel processing.
If the specified process fails because partition power-on or power-off is in progress, a warning dialog box
appears.
If the mounted CPUs on the SBs in the partition are not compatible when you are specifying the partition power-
on, a warning dialog box appears. Then, the Power On operation ends with an error.

TABLE 1.56 Setting and display items in the [Power Control] window

Item
# Displays a partition identification number (0 to 3).
However, the only registered partitions are those with a registered SB, IOB, or GSPB.
Partition Name Displays the name assigned to the partition.
Power Status Displays the partition power status.
System Progress Displays the progress of the partition.
- On
- Standby
- Power Off: The power to the partition is off.
- Power On In Progress: The partition power-on sequence is in progress.
- Reset: The partition is in this state from the start of the reset process until the OS
boot is completed.
- OS Running: The operating system is running.
- OS Shutdown: An operating system shutdown is in progress.
118
Description
C122-E110-10EN