Figure 5.71 [Change Boot Order] Screen After A Priority Order Setting Change - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations

FIGURE 5.71 [Change Boot Order] screen after a priority order setting change

6. To save the changes to settings and exit this menu, select [Commit Changes and Exit] and press the [Enter]
key.
To exit this menu without saving the changes to settings, select [Discard Changes and Exit] and press the
[Enter] key.
[Change Legacy Boot Order] menu
Use the [Change Legacy Boot Order] menu for boot with [Legacy Boot]. From this menu, the system determines
the device type from which to boot in a legacy boot. The device types are as follows:
- DVD/CD Device
- HDD Device
- Network Device
The default order of priority is DVD/CD Device, HDD Device, and Network Device.
If "//" is displayed at the beginning of a device type, the boot function of the device type is disabled. All types are
enabled by default.
The following figure shows an example of the [Change Legacy Boot Order] menu.
461 C122-E110-10EN