Display Commands; Show Access_Control - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
2.3

Display Commands

The information display commands are as follows:
-

2.3.1 show access_control

- 2.3.2 show active_mmb
- 2.3.3 show date
- 2.3.4 show exit_code
- 2.3.5 show partition configuration
- 2.3.6 show partition home
- 2.3.7 show partition name
- 2.3.8 show partition mirror_mode
- 2.3.9 show timezone
- 2.3.10 show gateway
- 2.3.11 showgateway_ipv6
- 2.3.12 show http
- 2.3.13 show http_port
- 2.3.14 show https
- 2.3.15 show https_port
- 2.3.16 show ip
- 2.3.17 showipv6
- 2.3.18 show hostname
- 2.3.19 show maintenance_ip
- 2.3.20 show ssh
- 2.3.21 show ssh_port
- 2.3.22 show telnet
- 2.3.23 show telnet_port
- 2.3.24 show network
- 2.3.25 show ntpq
- 2.3.26 who
- 2.3.27 help
- 2.3.28 netck traceroute
- 2.3.29 netck arptbl
- 2.3.30 netck arping
- 2.3.31 netck ifconfig
- 2.3.32 netck stat
This section describes how to use these commands.
2.3.1 show access_control
The show access_control command displays the current access control settings.
Privileges: Administrator
(1) Syntax
show access_control
252 C122-E110-10EN