Table 3.18 Buttons In The [Fibre Channel] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 3 PSA Web-UI (Web User Interface) Operations
Item
In Linux: This field displays "n.a." for any device not listed above.
In Windows: This field displays [Unknown] for any device not listed above (e.g., RBC,
CardReader, Bridge, Other).
Disk Name Displays the disk name.
This field displays a hyphen (-) for a non-disk device such as a GDS.
Device Vendor Indicates the vendor of the device.
Revision Displays the version of the device.
Device Name Displays the model name of the device.
Serial No Displays the serial number of the device. This field displays a hyphen (-) for a non-disk
device such as a GDS.
Channel/TargetID/ Displays the SCSI channel, SCSI target ID, and SCSI logical unit number of the device.
LUN
Disk Capacity Displays the disk capacity only if the device has a disk. Values are in units of GB (rounded
to 1 decimal place).
This field displays a hyphen (-) for a non-disk device and GDS. The displayed disk capacity
is slightly less than the catalog value because the displayed value is based on 1 GB = 1,024
MB = 1,024 x 1,024 KB.

TABLE 3.18 Buttons in the [Fibre Channel] window

Button
Status Clear
- Sequential Access
- Printer
- Processor
- WORM
- CD-ROM
- Scanner
- Optical Device
- Medium Changer
- Communications
- Unknown
- Enclosure
- Direct Access (GDS) (Linux only)
The window displays the [Status Clear] button only for users who have setting
privileges.
Check the check box in [Status] in [PCI Device Information] or [Information about
devices connected to controller]. Then, click the [Status Clear] button. A settings
confirmation dialog box appears. Click the [OK] button in the settings confirmation
dialog box to clear the hardware status of the Fibre Channel or the hardware status
of each device connected to the Fibre Channel. Clicking the button also releases any
312
Description
Description
C122-E110-10EN