PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Message number
W_00416
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
1.3.3
[DVD Switch] window
You can specify which partition to connect to the DVD in the [DVD Switch] window.
This window displays only that partition to which an SB/IOB has been assigned.
FIGURE 1.38 [DVD Switch] window
Select the radio button of the partition to connect to the DVD. Then, click the [Apply] button.
If you click the radio button of the Free line, the DVD is not connected to any partition.
The Partition Operator accounts are only permitted to assign and release the DVD to the partitions under their
management. They can neither assign nor switch the assigned DVD to a non-managed partition.
The available radio buttons in the [DVD Switch] window are those corresponding to the partitions under
management and to the Free line. The radio buttons for non-managed partitions are grayed out.
If the DVD is already assigned to a non-managed partition, a message appears. The partition cannot be operated.
TABLE 1.64 Setting and display items in the [DVD Switch] window
Item
#
Partition Name
Both On/Off Time are disabled.
Displays a partition identification number (0 to 3).
However, the only registered partitions are those with a registered SB/IOB/GSPB.
Displays the name assigned to the partition.
Message text
Description
129
C122-E110-10EN