PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Item
TABLE 1.74 Buttons in the [IPv4 Console Redirection Setup] window
Button
Apply
Cancel
(1) Menu operations
[Partition] - [Console Redirection Setup] - [IPv4 Console Redirection Setup]
(2) Window operations
1. Enter the IP address and the subnet mask. Then, specify whether to use video redirection, remote storage,
and text console redirection.
2. Click the [Apply] button.
Messages
The following table lists the messages displayed in this window.
Message number
W_00432
W_00433
I_00417
[IPv6 Console Redirection Setup] window
You can set the IP address and prefix length for access to the IPv6 console redirection LAN in the [IPv6 Console
Redirection Setup] window. You can also set whether to enable or disable video redirection, remote storage, and
text console redirection in this window.
To automatically set the IP address and prefix length, click the [Auto] button to automatically acquire them.
The default is Disable.
Click the [Apply] button to apply the settings for video redirection, remote storage,
and text console redirection for the specified partition.
Click the [Cancel] button to restore the original information and cancel the application
of the settings for video redirection, remote storage, and text console redirection.
Invalid IP Address specified.
The duplicate IP address was found.
Are you sure?
Description
Description
Message text
143
C122-E110-10EN