Set Https; Set Https_Port - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
2.2.17

set https

The set https command enables or disables an HTTP server.
The default setting is disable (https disabled).
Privileges: Administrator
(1) Syntax
set https [enable | disable]
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Unable to execute this command on a standby MMB.
2.2.18

set https_port

The set https_port command sets a port to accept an HTTPS session. The default is 432.
The specifiable port numbers for <port> are 432 and the integers from 1024 to 65535.
Privileges: Administrator
(1) Syntax
set https_port <port>
(2) Options
None
241 C122-E110-10EN