Fujitsu PRIMEQUEST 1000 Series Tool Reference page 459

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
Item
Target Port
Boot LUN
CHAP Type
CHAP Name
CHAP Secret
ISID
Set the target TCP listening port.
You can enter a value between 0 and 65535 (in decimal).
This item is not displayed when [Get Target info via DHCP] is
[Enabled]. It is available when DHCP is [Disabled] or [Get Target
info via DHCP] is [Disabled].
The default is 0.
Set the target LUN number.
You can enter a value in the following format:
x to xxxx-xxxx-xxxx-xxxx (in hexadecimal)
The default is 0.
Set the CHAP type.
- None
- One way
- Mutual
The default is None.
Enter the CHAP user name.
You can enter a total of 125 characters.
Remarks
- The following characters can be entered here:
0 to 9, A to Z, a to z, ! " # $ % & ' ( ) * + , - . / : ; < =
> ? @ [ \ ] ^ _ ` { | } ~
Enter the CHAP password.
You can enter a total of 12 to 16 characters.
Remarks
- If the number of entered characters is insufficient, the
[Please enter enough characters Press ENTER to
continue] pop-up window appears.
- The following characters can be entered here:
0 to 9, A to Z, a to z, ! " # $ % & ' ( ) * + , - . / : ; < =
> ? @ [ \ ] ^ _ ` { | } ~
Enter the last 6 digits of the ISID (ID used by the initiator to
establish a session with the target) as needed.
The default ID is generated from the MAC address.
Remarks
- If the number of entered characters is insufficient, the
[Please enter enough characters Press ENTER to
continue] pop-up window appears.
- If you enter 7 or more digits, the [Error! Input is
incorrect, please input 6 hex numbers!] pop-up
window appears. Even when the number of digits is 6,
any non-hexadecimal value included in the digits is
entered as 0.
Example: ABCXYZ -> ABC000
427
Description
C122-E110-10EN