Figure 3.10 [Fibre Channel] Window; Table 3.17 Display And Setting Items In The [Fibre Channel] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 3 PSA Web-UI (Web User Interface) Operations
Remarks
- A disk that runs under the ETERNUS multipath driver environment is displayed as a member of the PCI
device group sharing the same multiple paths. In Windows, the [Serial No.], [Disk Capacity], and [Disk
Name] fields display a hyphen (-).
- If a GDS-managed disk is added or removed while the operating system is active, the [Device Type] and
[Disk Capacity] values in the [Fibre Channel] window will not be updated. To update the window display,
you need to restart PSA or manually execute the following PSA command. (Only the Linux version of PSA
supports the following command.)
/opt/FJSVpsa/sh/force_search.sh -a
- If EMC Power Path is used, the [Disk Name], [Serial No], and [Disk Capacity] fields may display a hyphen
(-).
- If a non-Fujitsu storage unit is connected, the window does not display information about virtual disks related
to the unit.
- If a disk is started with power interlock control between an ETERNUS or other storage unit and the partition,
[Disk Name], [Serial No], and [Disk Capacity] may display a hyphen (-). In such cases, execute the following
command. (Only the Linux version of PSA supports the following command.)
/opt/FJSVpsa/sh/force_search.sh -a

FIGURE 3.10 [Fibre Channel] window

TABLE 3.17 Display and setting items in the [Fibre Channel] window

Item
PCI Device Information
Description
310 C122-E110-10EN