Fujitsu PRIMEQUEST 1000 Series Tool Reference page 394

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 4 PSA CLI (Command Line Interface) Operations
Removing the card....
The card has removed.
Please replace the card, and input "y" key.
When the above message appears, replace the PCI card.
Please replace the card, and input "y" key.
y
Adding the card..............
The card has added.
C:\>
(4) Output messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
FJSVpsa : E 08740 this command can not execute doubly :%s
FJSVpsa : E 08741 this command needs Administrators privilege :%s
FJSVpsa : E 08742 invalid option :%s
FJSVpsa : E 08743 option num is invalid :%s
FJSVpsa : E 08744 no unit id :%s
FJSVpsa : E 08745 internal error :%s
FJSVpsa : E 08746 can not make event file :%s
FJSVpsa : E 08748 no resource :%s
FJSVpsa : E 08751 command timeout(WMI) :%s
FJSVpsa : E 08752 configuration file error :%s
FJSVpsa : E 08753 This card cannot be removed :%s
FJSVpsa : E 08754 can not get snmp information :%s
FJSVpsa : E 08755 no card :%s
FJSVpsa : E 08756 internal error(ipmi) :%s
FJSVpsa : E 08757 this command can not execute during refresh :%s
FJSVpsa : E 08758 this unit is occupied :%s
FJSVpsa : E 08759 command timeout(SNMP) :%s
362 C122-E110-10EN