Who - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
Item
poll
reach
delay
offset
jitter
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to ntpq command.
2.3.26

who

The who command displays the following information on the user currently logged in to the MMB:
- Login name
- Login time
- Remote host name (or its IP address)
The command displays the remote host name only if it could acquire the name, during login, from the DNS
specified on the MMB. If the remote host name is unknown, the IP address is displayed. If the login port is
the serial port, a hyphen (-) is displayed.
- Whether the user logged in via telnet/SSH, the Web-UI, or the serial port.
If the user logged in via telnet/SSH, "Telnet/SSH" is displayed.
If the user logged in via the Web-UI, "WebUI" is displayed.
If the login port is the serial port, a hyphen (-) is displayed.
Privileges: All
Interval for acquiring time from the remote server (Unit: seconds).
Success/failure flags for the last 8 times of time acquisition (described in octal)
The success/failure result for the last 8 time acquisition times is described in 8
bits (0: failure, 1: success), and displayed in octal. Every time that a time is
acquired, the bit is shifted to the left, and the rightmost bit accounts for the latest
acquisition result.
For example, if this value is 356
8 acquisition results and the fourth preceding acquisition fail. When the next time
acquisition is successful, the value becomes 335
The amount of time required for network round trip transmission with the remote
server (Unit: milliseconds)
The deviation between the remote time and the internal clock (Unit:
milliseconds).
The deviation between the time consisting of the time with the poll interval added
to the time acquired last, and the latest time actually acquired (Unit:
milliseconds). The deviation is generated based on their mutual time precision
and the network status.
267
Description
=11,101,110 , the latest result out of the last
(8) (2)
= 11,011,101
(8)
.
(2)
C122-E110-10EN