Fibre Channel] Window; Table 3.16 Buttons In The [Raid Controller] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 3 PSA Web-UI (Web User Interface) Operations

TABLE 3.16 Buttons in the [RAID Controller] window

Button
Status Clear
Return
(1) Menu operations
[Partition] - [Partition#x] - [PSA] - [PCI Devices] - [Unit]
(2) Window operations
- Clearing the status of the PCI device
1. Check the check box in the [Status] field. Then, click the [Status Clear] button.
A settings confirmation dialog box appears.
2. Click the [OK] button in the settings confirmation dialog box.
This clears the status of the PCI device.
3. Click the [Return] button.
The browser returns to the [PCI Devices] window.
- Proceeding without clearing the status of the PCI device
1. Click the [Return] button.
The browser returns to the [PCI Devices] window.
(3) Error message
Error: Status Clear Error :
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
3.6.4

[Fibre Channel] window

The [Fibre Channel] window is the detail window displayed in association with [0C0400] (Fibre Channel) in [Device
Class] in the [PCI Devices] window. The [Fibre Channel] window displays Fibre Channel information.
Users who have setting privileges can clear the status with the [Status Clear] button.
After a new device is connected to the Fibre Channel or a device is disconnected from the channel, the window
display takes up to three minutes to reflect this addition or removal.
The window displays the [Status Clear] button only for users who have setting privileges.
Check the check box in [Status] in [PCI Device Information]. Then, click the [Status Clear]
button. A settings confirmation dialog box appears. Click the [OK] button in the settings
confirmation dialog box to clear the status of the PCI device.
Clicking the button also releases any suppression of e-mail, REMCS, or SNMP trap
notification by a notification suppression function.
Click the [Return] button to return to the [PCI Devices] window.
ErrorCode=****
Description
309 C122-E110-10EN