Fujitsu PRIMEQUEST 1000 Series Tool Reference page 287

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
Fourth and subsequent columns: The SBs, IOBs, and GSPBs contained in the partition are displayed in this order.
The units in each of the SB, IOB, and GSPB groups are displayed in ascending order of their assigned numbers.
A reserved SB is indicated by "R" at the front (i.e., RSB#x).
Privileges: All
(1) Syntax
show partition configuration [all | free | <partition#> {[, | -] \
<partition#>}]
\: Indicates that the line is not broken.
(2) Options
all: This option displays all the partitions and SBs, IOBs, and GSPBs that do not belong to any partition.
free: This option displays the SBs, IOBs, and GSPBs that do not belong to any partition.
<partition#>: This option displays the specified partition.
You can use the following methods to specify multiple partitions:
- Specify partition numbers delimited by commas.
- Specify a range of partition numbers.
Remarks
You can specify comma-separated partition numbers together with a range of partition numbers.
(3) Usage example
- Example: Displaying configuration information on partitions 0 to 2 in the PRIMEQUEST 1800E
# show partition configuration 0-2
0 hogehoge
1 testserver
2
#
- Example: "all" is specified for the same configuration as that above.
# show partition configuration all
0 hogehoge
1 testserver
2
3 <The field is blank because nothing is registered.>
free
SB#0SB#0 RSB#3
SB#1SB#1 IOB#0B
SB#2SB#2 IOB#1A
SB#0SB#0 RSB#3
SB#1SB#1 IOB#0B
SB#2SB#2 IOB#1A
IOB#1B
255
IOB#0A GSPB#0A
GSPB#0B
GSPB#1A
IOB#0A GSPB#0A
GSPB#0B
GSPB#1A
C122-E110-10EN