Firmware Information Acquisition Command (Getfwinfo) - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 4 PSA CLI (Command Line Interface) Operations
4.9

Firmware Information Acquisition Command (getfwinfo)

The getfwinfo command collects the model name, serial number, and firmware version numbers of a machine and
writes the information to a file in text format. This command collects the firmware version numbers of all the MMBs
mounted in the cabinet, the version number of the BIOS (operating version only) installed on the Home SB from
which the command was executed, the BMC firmware version number (the operating version only), and the unified
firmware version number for the machine.
Remarks
The user must have root (Linux) or Administrator (Windows) privileges to execute this command. In Windows, if
an operating system function (access control function) is used to execute the command with privileges other than
Administrator privileges, the end status is undefined.
(1) Syntax
For output_filename, specify the file name of the output file.
- In Linux or VMware
/opt/FJSVpsa/sh/getfwinfo
- In Windows
getfwinfo {output_filename}
(2) Options
None
(3) Usage example
- In Linux
To write firmware information to /tmp/fwinfo.txt
#/opt/FJSVpsa/sh/getfwinfo
- In Windows
To write firmware information to C:\tmp\fwinfo.txt
> getfwinfo
(4) Output messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
No filename
Open failed : filename
firmver internal error
IPMI driver open error
{output_filename}
/tmp/fwinfo.txt
C:\tmp\fwinfo.txt
358 C122-E110-10EN