PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
2.2.19
set ip
The set ip command sets the <IP address> and <netmask> values for the management LAN interface.
The specified virtual IP address identifies the MMB connected via the serial port.
The default setting value is 0.0.0.0.
Privileges: Administrator
(1) Syntax
set ip <ip address> <netmask>
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified IP address is invalid.
The specified netmask is invalid.
The specified IP address is duplicated.
The specified IP address is loopback address.
Unable to execute this command on a standby MMB.
2.2.20
set ipv6
The set ipv6 command sets the IPv6 global address and prefix length for the management LAN interface.
The command sets an MMB virtual IP address.
To automatically set an address, set "auto" in the options.
242
C122-E110-10EN