Device Manager] Menu; Figure 5.21 Example Of Display Of The [Device Manager] Menu - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
5.5

[Device Manager] Menu

Use the [Device Manager] menu for settings for each I/O device, such as whether to assign the I/O space and whether
to enable PXE boot. The following figure shows the display of the [Device Manager] menu immediately after it
starts.

FIGURE 5.21 Example of display of the [Device Manager] menu

Remarks
The [Configure PCI Bus Padding] menu is a function that was added with unified firmware version SA10082
(PRIMEQUEST 1800E). The PRIMEQUEST 1800E2 supports this function as standard. You can confirm the
unified firmware version by clicking [System] - [Firmware Information] and checking [Unified Firmware Version]
in the [Firmware Information] window in the MMB Web-UI.
For details on the [Firmware Information] window, see 1.2.6 [Firmware Information] window.
(1) Page information display area
This area displays [Device Manager].
(2) Menu selection area
This area displays the menu outlined in TABLE 5.12 Displayed contents of the menu selection area.
398 C122-E110-10EN