System Power Control] Window; Figure 1.12 [System Power Control] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
The following table lists the messages displayed in this window.
Message number
I_00013
E_00100
W_00426
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
1.2.8

[System Power Control] window

You can set the power control for the entire PRIMEQUEST 1000 series system from the [System Power Control]
window.
Remarks
- Shut down the operating systems on partitions that have Windows installed. In an emergency, such as if the
system is non-responsive, power off the system by executing [Force Power Off] from the MMB.
- In the following case, confirm the status by referring to 11.2 Troubleshooting in the PRIMEQUEST 1000
Series Administration Manual (C122-E108EN). If the problem persists, contact your sales representative or
a field engineer.
Before making contact, confirm the model name and serial number shown on the label affixed to the main
unit. Until the problem is solved, do not execute [Reset] or [Force Power Off] for the partition.
- Processing of the [Power off], [Reset], or [Force Power Off] operation and the shutdown command
from the operating system may continue for a long time for a partition. If so, the MMB Web UI window
displays the status of each component and "Read Error" for [Part Number] or [Serial Number].

FIGURE 1.12 [System Power Control] window

Setting completed.
Failed to set the System Setup
Invalid values specified.
Message text
79 C122-E110-10EN