Psa-Mmb Communication Lan Setting Command (Setpsalan); Psa-Mmb Communication Lan Setting Command; Setpsalan - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 4 PSA CLI (Command Line Interface) Operations
4.12

PSA-MMB Communication LAN Setting Command (setpsalan)

The setpsalan command sets the PSA-MMB communication LAN.
You need to execute this command after installing PSA. Before executing this command, restart the operating
system.
Executing this command sets the PSA-MMB communication LAN as follows.
- IP address
172.30.0.<partition ID + 2>/24
Example) When the partition ID is 2
172.30.0.4/24
- Communication settings
Auto Negotiation: off
Speed: 100 Mbps
Duplex: full
Remarks
- This command is available only in Windows.
- The user must have Administrator privileges to execute this command. If an operating system function (access
control function) is used to execute the command with privileges other than Administrator privileges, the
end status is undefined.
(1) Syntax

setpsalan

(2) Options
None
(3) Usage example
> setpsalan
(4) End status
0: Normal end
>0: Abnormal end
(5) Notes
Before executing this command, restart the operating system after installing PSA.
367 C122-E110-10EN