Figure 1.34 Error Display In The [Power Control] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations

FIGURE 1.34 Error display in the [Power Control] window

(1) Menu operations
[Partition] - [Power Control]
(2) Window operations
1. Select a power control item for each partition from the [Power Control] pull-down menu. Then, click the
[Apply] button.
A settings confirmation dialog box appears.
2. Click the [OK] button to confirm the setting.
Messages
The following table lists the messages displayed in this window.
Message number
E_00077 Partition#%aa cannot execute Power On.
E_00078 Partition#%aa cannot execute Power Off.
E_00079 Partition#%aa command failed.
E_00080 Partition#%aa cannot execute Power Cycle.
E_00081 Partition#%aa cannot execute Reset.
E_00082 Partition#%aa cannot execute NMI.
E_00084 Partition#%aa cannot execute Force Power Off.
E_00091 Force Power Off Delay setting failed.
E_00101 Unable to power on the partition#%aa due to CPU mismatch between SBs.
I_00214 Unable to Power On the Partition#%aa because this Partition is under maintenance.
Message text
121 C122-E110-10EN